MATHCAD WORKSHEETS

This area contains the Mathcad worksheets discussed in the third edition of Chemical and Engineering Thermodynamics by S.I. Sandler.

bulletHome


bulletBasic


bulletVisual Basic


square gray bullet Mathcad


bulletUtilities
separator
INDIVIDUAL MATHCAD FILES       ZIPPED SETS OF MATHCAD FILES

This page is divided into two sections.

The first contains individual Mathcad utility programs with a brief description of each. ".bin" is added to each file so that it can be downloaded directly. If you wish to download these files individually make sure to also download the data file at the end of the list.

The second section contains zipped sets : one contains all the Mathcad utility programs, the next contains a related set of worksheets, and the two that follow are Mathcad worksheets for illustrations in the textbook.

 

INDIVIDUAL MATHCAD UTILITY PROGRAMS

 

bubblp.mcd.bin

Bubble point pressure calculation using the Peng-Robinson EOS

 

bubblt.mcd.bin

Bubble point temperature calculation using the Peng-Robinson EOS

 

chemeqprm.mcd.bin

General chemical equilibrium constant calculation program

 

chemeqdat.dat.bin

An example datafile for chemeq

 

dewp.mcd.bin

Dew point pressure calculation using the Peng-Robinson EOS

 

dewt.mcd.bin

Dew point temperature calculation using the Peng-Robinson EOS

 

prpvap.mcd.bin

Vapor pressure of a pure fluid at a given temperature using the Peng-Robinson EOS

 

prvap.mcd.bin

Vapor pressure and thermodynamic property calculations using the Peng-Robinson EOS

 

prvapt.mcd.bin

Boiling temperature calculations using the Peng-Robinson EOS, given pressure of a pure fluid

 

flash.mcd.bin

Isothermal flash calculation using the Peng-Robinson EOS

 

thermomix.mcd.bin

Mixture calculations using the Peng-Robinson EOS

 

thermprop.mcd.bin

Pure component thermodynamic properties calculations using the Peng-Robinson EOS

 

datafile.mcd.bin

Necessary data worksheet for the many of the above files

 

 

N O T E

1. When downloading the above files, remove the .BIN and save them with an .MCD extension, or a .DAT extension in the case of chemeqdat.dat.bin.

2. "datafile.mcd.bin" is a file required for several of the above worksheets.  Download it to your mathsoft directory, remove the .bin extension, and update the reference in the worksheet you are using.

 

ZIPPED SETS OF MATHCAD FILES

 

allmcad.zip

All of the above Mathcad files.

 

actcoef.zip

A worksheet to fit excess Gibbs free energy data to either the Redlich-Kister expansion, two forms of the NRTL and van Laar models, or the Wilson model. The worksheet requires that all files be in the same folder.

 

mcillustrations.zip

Mathcad worksheets for the following illustrations in the textbook: 2.5-1, 2.5-3&5, 3.5-3, 4.5-1a, 4.5-1c, 4.7-1, 5.4-4, 5.4-8, 8.01-1, 8.01-2, 8.01-3, 8.01-4, 8.03-1, 8.04-2, 8.04-8, 8.10-2, 9.1-4b, 9.1-7, 9.1-8, 9.4-1.

 

aaillustrations.zip

Adobe Acrobat files for the following Mathcad illustration worksheets 2.5-1, 2.5-2, 3.5-3, 4.5-1a, 4.5-1c, 4.7-1, 5.4-4, 5.4-8, 8.01-1, 8.01-2, 8.01-3, 8.01-4, 8.03-1, 8.04-2, 8.04-8, 8.10-2, 9.1-4b, 9.1-7, 9.1-8, 9.4-1. Mathcad is not needed to see these illustrations.

 

Home   |   Basic   |   Visual Basic   |   Mathcad   |   Utilities